rubber accelerator TMTD
Chemical Name:Tetramethyl thiuram disulfide
Molecular Formula:C6H12N2S4
Molecular Weight: 240.43
CAS NO:137-26-8
EINECS NO.: 205-286-2
Specification:
Properties:White powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster.
Application:Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation.
A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of chloroprene rubber.
Packing:25kg in kraft paper bag with PE bag inside.
Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Notes: the products could be oil coated powder,granular as per customer’s request.
Molecular Formula:C6H12N2S4
Molecular Weight: 240.43
CAS NO:137-26-8
EINECS NO.: 205-286-2
Specification:
| Appearance | white powder |
| Initial M.P. oC≥ | 142.0 |
| heating loss %≤ | 0.40 |
| Ash%≤ | 0.30 |
| Residues on sieve(150μm), % ≤ | 0.10 |
Application:Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation.
A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of chloroprene rubber.
Packing:25kg in kraft paper bag with PE bag inside.
Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Notes: the products could be oil coated powder,granular as per customer’s request.
Contact person: Ms. catherine zhang
Position: Sales Manager
Mobi:
Phone: +86-371-63210302 - Fax: +86-371-63210302
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture