High Voltage Self-adhesive Tape

Offer to Sell
High Voltage Insulated Tape,
Electrical Tape is a highly conformable self-fusing EPR (Ethylene Propylene Rubber) based, high voltage splicing tape.  It is a non-vulcanizing, shelf stable tape with excellent electrical properties. Self-adhesive Tape can be used as an insulation for low-voltage applications as well as an insulation for splices up to 69kV
Application

1: Primary electrical insulation for splicing cable from 600V to 69kV on all solid dielectric cables.

2:  Primary insulation for building stress cones on cables up to 33kV on all solid dielectric cables.

3:  Jacketing on high-voltage splices and terminations.

4:  Moisture sealing electrical connections.

5:  Bus bar insulations.

6: End sealing high-voltage cable

STANDARD PRESENTATION

1:   Roll length: 3m, 5m, 9.1m, 10m

2:   Roll width: 19mm, 25mm, 38mm, 50mm

3:   Core: 38mm dense plastic

4: Packaging:PP bag and little box.According to customer requirements.




DESCRIPTION

Self-adhesive tape is an insulating, self-amalgamating rubber tape. White/Black released liner.

APPLICATIONS

For jointing and repairing a wide range of solid dielectric power cables up to 20 kV.
For insulation, waterproofing and protection of electrical components.

PRODUCT BENEFITS

1:Excellent physical and electrical properties with a high degree of stability under  conditions of use.

2:The tape amalgamates rapidly when applied under tension to provide a void-free homogeneous wrapping,without the need for external heat or pressure.

3:Compatible with a wide range of rubber and plastic dielectric cable insulation.

4:The tape will remove cleanly when cut, allowing it to be used as temporary insulation or protection.

5:The tape should be protected by anti-ultraviolet material during using.

6:Service temperature -20 to +75°C.

7:Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable plastic liner.


RECOMMENDATIONS
Care should be taken to avoid direct contact between the tape and petroleum-type solvents and oils. Oils may affect the electrical properties of the tape.

The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10°C and +30°C. Underthese conditions, the storage life of the tape in a temperate climate will be at least one year.
Contact person: Mr. Maple
Position:
Mobi:
Phone: 86 311 80690567 - Fax:
Address: No.298 Zhonghua north Street
Country: China
SEND INQUIRY
Please fill in fully your information to send email
Your name*
Email*
Company
Address*
Country*
Phone*
Content*