Dry Vitamin A Acetate Beadlet (325,000 ~ 500,000)
Chemical name: Retinyl acetate, all-trans retinol acetic acid ester
CAS

We sell Selenious Acid(H2SeO3 ) 98%Selenious Acid H2SeO3 98% Min 60.4% Min FORMULA: H 2 SeO 3 MOLECULAR WEIGHT: 128.97 CAS No.: 7783-00-8 EINECS NO.:231-974-7CHARACTERISTIC: Colorless hygroscopic crystal powder. has 　deliquescence, soluble in water and ethanol. USAGE: Used for chemical reagent,

Features & Benefits

Ammonium sulphate is a nitrogen fertilizer. Heavy spillage may cause adverse environmental impact such as eutrophication in confined surface waters.

Completely soluble in water.
Easily adapted to all ranges of dry fertilizer application methods.

A perfect choice as a

Fertilizer Prille
Properties: Density: 1.335
M.p.: 131-135oC
HS CODE: 31022100
CAS: 【57-13-6】
Solubility in water: 1080 g/L (20oC)


Character:
Colorless or white needle-like crystals or rod, industrial or agricultural goods white bit micro-satellites solid red odorless and tasteless.

Melamine is white crystal powder, it can dissolve in glycerine, pyridine, heat ethylene glycol, acetic acid and formaldehyde. It is difficult soluble in the ether, benzene and tetrachloromethane. It will sublimate when heated, heated slongly it will decomposite.
Melamine is kind of important

BASIC INFORMATION:
CAS No.: 10034-96-5
H.S. Code: 28332990
EINECS NO. 232-089-9
Formula: MnSO4.H2O
Other name: manganese sulfate,manganese sulphate,manganese sulfate monohydrate,manganese sulfate mono,manganous sulfate

SPECIFICATION:
Mn: 31.8% min
Pb: 20 ppm max
As: 20 ppm

BASIC INFORMATION:
CAS No.: 7446-19-7
H.S. Code: 28332930
EINECS NO.: 231-793-3
Formula: ZnSO4•H2O
Other name: zinc sulfate,zinc sulphate,zinc sulphate monohydrate,zinc sulfate 1 hydrate ,white vitriol

SPECIFICATION:
Zn: 35.5% min
Pb: 10 ppm max
As: 10 ppm max
Cd: 10

Use:.Agriculture, Chemical industry, Chemical synthesis, Dyestuffs, pigments and optical brighteners, Manufacturing of antibiotics, Manufacturing of diabetics, Manufacturing of dyestuffs, Manufacturing of fungicides, Manufacturing of growth regulators, Manufacturing of herbicides, Manufacturing of

Methylene Chloride(MC)
specifications:
1) Molecular formula: CH2C12
2) Appearance: transparent, colorless liquid without suspended matter
3) Standard: GB4117-92
4) dichloromethane Purity: 99.95% min.
5) Acidity (based on Hcl): 0.0004% max.
6) Water content: 0.040% max.
7) Residue on

Formula: Ca ( ClO ) 2
-IMDG code page: 5138
-H.S Code: 28281000
-U. N. NO. : 2880
-Specification:

1--Available Chlorine 65% Min
2--Moisture 4-10%
3--Chlorine Loss 8% max
4--Size (255um-2mm)90% min
5--Appearance Light gray granular
6--Water insoluble 5% max

-Packing in

The hexamine we are producing is not added with antiblockingagent.But it is not easy to block for a long time.

We have had an experiment In the stock.Tempriture is 20 degree,and moisture is 30%.8 bags in a roll. THe hexamine is not caked at all after 7 months.

Although after the factory

DPT blowing agent(N,N´-Dinitrosopentame-thylenetetramine) is mainly used in the industry of rubber products and PVC plastic products as the vesicant.
The dosage in the rubber and plastics industry is 3-5% and 5-15%. It is a kind of light yellowy powder with no odor, but there is odor of