Raw material:C65500 /C65100 silicon bronze
Ring shanks provide better holding power than ordinary smooth shank nails.
Silicon bronze ring shank nails are commonly used in wood boat construction and repair.They will not rust or corrode in marine use.
Please choose which you need as follows:
1

Silicon bronze threaded rods(C65100,C65500) were made to ANSI,DIN,BS,etc.
Dimension:
diameter:4mm-25mm, Length:max 6 foot
for example:10-24 x 3' / 6'
1/4-20 x 3' / 6'
5/16-18 x 3' / 6'
3/8-16 x 3' / 6'
1/2-13 x 3' / 6'
5/8-11 x 3' / 6'
3/4-10 x 3' / 6'
1-8 x 3' / 6'
M5x0.8x1000

Besides silicon bronze finished hex nut,heavy hex nut,jam hex nut,machine hex nut,Yushung also produce silicon bronze square nuts and have considerable items in stock.

silicon bronze carriage bolts are C65500 high silicon bronze, Manufacturing standard:IFI, DIN, etc.
Packing:polybag and carton
Specifications:
#10-24 x 1" - 4"
1/4-20 x 1" -12"
5/16-18 x 1" - 12"
3/8-16 x 1" - 12"
1/2-13 x 1.5" - 25"
5/8-11 x 3" - 25"
3/4-10 * 4" -25"
M6 * 15 -

We mainly manufacture from M3 to M20(#6 - 3/4")phosphor bronze fasteners including bolt, screw, nut, washer, threaded rod.we use cold heading & cutting craft to manufacture these fasteners.Material contains QSn6.5-0.1(C51900), etc were purchased from ISO certificated source.
Manufacturing

Name: Rubber Press
Other name: Rubber Press,Rubber Moulding Press, Plate Rubber Vulcanizer,Rubber Vulcanizing Press Machine,Hot Vulcanizing Press Machine,Rubber Hydraulic Press
01Machine brief description
1.Structure: column type
2.Operation: safe and convenient operation
3.Production

This machine is made in multi-cylinder or single-cylinder type,with fast and slow opening mould,pushing moulds and setting the speed of the plate when up and down.Those functions brought great facilitate for making silicon rubber insulator,lightning rod,conveyor belt joint repairing,cable connector

Type
XLB-500x3000x1/4.00MN

Nominal Clamp Mould Force(MN)
4.00MN

Specification Of Hot Plate(mm)
500x3000×60

Number Of Working Layer
1

Cylinder Number(pc)
4

Piston Diameter(mm)
￠300mm

Max.Stroke Of Piston(mm)
400mm

Distance Between Hot Plates(mm)
400mm

This machine is used for pressing all kinds of rubber model products,rubber plate,thermosetting plastic,and so on.Also can be used as common hydraulic machine.This machine is structured of frame type,it adopts hydraulic drive,electric rely controll,the curing time and pressure can be adjusted.So it

This machine is used for pressing all kinds of rubber model products,rubber plate,thermosetting plastic,and so on.Also can be used as common hydraulic machine.
This machine is structured of frame type,it adopts hydraulic drive,electric rely control,the curing time and pressure can be adjusted.So

Cylinder Number(pc) 2

Distance Between Hot Plates(mm) 130mm

Unit Area Pressure Of Hot Plate (kg/cm2) 3.1Mpa

Hydraulic Oil Pressure(Mpa) 16Mpa

Driving Motor(Kw) 380V 50HZ 55KW

Max.Temperature 0-300

Control Mode PLC (Omron)

Structure Frame Type
04. Our

Rubber impact bar is used in loading zone of conveyor belt to absorb impact force from falling material to protect conveyor belt. The other hand it can minimize the friction between impact bar and conveyor belt to protect conveyor belt.

1.Avoids the damage to the belt through the contact between