Name ： Ceramic Core Injector
Specification ： 10T－50T
Application： Special equipment for manufacturing ceramic core
Model ： YT-ZXJ10-50T

The ceramic core injector is a special equipment for manufacturing ceramic core by hot-press method. It is the approved product of YuTian

Name ： Box Type Fuel(Electric and Heat) Roasting Furnace
Specification ： 1000×1000，1200×1200
Application： Used for roasting silicasol pattern
Model ： YT-RYBS1000，YT-RYBS1200

“YuTian” brand box type fuel roasting furnace is a special wax-pattern roasting furnace in

Name ： Automatic Dewaxing Autoclave
Specification ： Φ800～1400
Application： Tepid-wax Dewaxing Equipment
Model ： YT-DRTF800、YT-DRTF1000、YT-DRTF1200、YT-DRTF1400、


Automatic dewaxing autoclave is the special equipment of pattern wax-melting technical in casting line.

Name ： Table-turned Type Wax Injector With Free Change of Wax Container
Specification ： 5T, 8T, 10T
Application： Suitable for the investment casting silica sol pattern forming line
Model ： YT-SMZJ5T（Z）、YT-SMZJ8T（Z）、YT-SMZJ10T（Z）


The hydraulic motor of

Name ： Automatic Wax Injector With Free Change of Wax Container
Specification ： 10T
Application： Suitable for the investment casting silica sol pattern forming line
Model ： YT-ZMZJ10T

"Yutain" brand automatic wax inject machine integrates the function of wax supply, temperature

We are Qinhuangdao YuTian Science & Tech Co., Ltd----the manufacturer of investment casting line. Our casting machine includes below:
1. Tepid-wax pattern forming equipment includes:
1) Single Station Wax Injection Machine
2). C-form Two Station Wax Injection Machine
3). Table-Turned Type

WIX oil filters hold more than 45 percent more dirt than the leading national brand. We could stop here, but we’re sure you want to know why.
Oil filter effectiveness is measured three ways: particle size retention (filtration efficiency), dirt-holding capacity, and resistance to flow.
WIX has

safety elements, square elements). SFG can also develop and design new products to meet customer's requirements.Product Advantage
To evaluate a filter from its appearance and life is not complete. SFG runs after reasonable design and its high performance can effectively extend the life of your

SKG Series TCI rock bits
RUBBER SEALED BIT WITH ROLLER BEARING

SKG series TCI rock bit is designed with roller bearing and rubber O-ring seal . This bit can achieve longer footage and higher ROP when drilling under medium to low WOB and high RPM.
The size range of SKG series bit is from 10 5 /8

SKW roller cone bit
NON-SEALED BITS

SKW series bit is non-sealed roller bearing bit .This is suitable for surface hole drilling for every kind of wells and upper sections with good drillability .It is with the advantages of low cost and high ROP ,ect.
The size range of SKW series bit is from 14

GJ/GJT TCI tricone bits
METAL SEALED BIT WITH ROLLER BEATING

GJ/GJT series TCI tricone bit adopts metal seal with roller bearing ,which can drill stably with middle to low WOB and middle to high RPM,it is the ideal choice for higher part of well section.
The size range of GJ/GJT series bit is

SKH Series Roller cone bits
RUBBER SEALED BIT WITH HOURNAL BEARING

SKH series Roller cone bit adopts journal bearing rubber O-ring seal along with more aggressive cutting structure. This bit is with the features of longer footage and higher ROP and is the ideal choice for drilling applications