These equipments are specially designed according to the characteristics and requirements of EFT measurement and it is an ideal disturbance source of EMS measurement. They have fine performance, such as high stability, high reliability, easy to use etc, and meet the standard requirement of IEC

Carbide Inserts
Precision carbide inserts with manufacturing process of EDM ,precision optical grinding,it is used for the maintenance of mould tools ,progressive die stamping.the state-and-art machining devices and engineers are employed to guarantee the good quality and performance.
Carbide

UI2050 Power Supply Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC62384:2006. It measuring the following parameters: Input Characteristics Test (AC&DC), Output Characteristics Test (AC&DC), Input Start Characteristics Test

LS860 Luminous Intensity Distribution Tester is a precise electronic instrument for measuring LED luminous intensity. It's strictly designed according to LED standard requirements of CIE127:1997 A or B Condition.

Measures:
Forward voltage(VF), Reverse Current(IR), Luminous Intensity(IV),

LS280 is used to measure optical maintenance factor for high power LEDs, LED module, LED bulb or other LED luminaries. It is the important measuring equipment for performing the reliability of illuminants.

Measure:
Illuminance Maintenance curve, factor and data: lx VS time
Luminous Intensity

Electrostatic discharge simulator (electrostatic gun) ESD61000-2 in full compliance with IEC 61000-4-2, EN61000-4-2 and GB/T17626.2 standards, the ESD generator for the assessment of electrical and electronic equipment to withstand ESD performance to develop a common criteria, the technology has

JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5:2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test organization for the products

• Purpose: According to IEC 60068, this product is applicable for the testing of the indices of the spaceflight and aviation products, information electronic instruments and meters, materials, electrical and electronic products and electronic and electrical components and parts in high-temperature

LSG-1800 Goniophotometric system is an automatic goniophotometric measurement system for measuring photometric parameters of luminaires, such as LED road lighting fixture, room lighting fixture and projecting lighting fixture. The measured data meets IES standard format and can be applied for

LPCE-1 Spectrophotometer & Integrating Sphere Test System is suitable for photometric and colorimetric measurement of luminaries such as Energy-saving lamp, Fluorescent lamp, HID lamp (high voltage sodium lamp and high voltage mercury lamp), CCFL and LED. The measured data meets the requirements of

LMS-5000 Quick-Scan Spectrophotometer Colorimeter is a very widely applied single monochromators spectrophotometer with high accuracy. A typical measuring time during the spectral range from 380~800nm is less than 10seconds. LMS-5000 used with right size integrating sphere and standard light source

Specification:
• DIA: IS-0.3M (φ0.3m)、IS-0.5M (φ0.5m)、IS-1.0M (φ1.0m)、IS-1.5M (φ1.5m)、IS-2.0M (φ2.0m). Other size can be designed according request
• Multi interface on the sphere, testing of photometers and colorimeters at the same time.
• Applications: 1. Luminous flux