Address: 93B, No. 14, Huanke East 1st Road, Jinqiao Science & Technology Industrial Base, Tongzhou District, Beijing City
Country: China
V-Ring Seals
Price:
V-Ring Seals
The V-shaped axial seal is a fully rubber oil seal that mounts directly onto the rotating shaft and stays self-retained without special surface requirements. It rotates with the shaft to provide reliable sealing, allows quick installation and disassembly, and supports large sizes - from 4.5 mm to 2000 mm - using seamless or segmented hot-vulcanized connections for on-site assembly.
The V-shaped axial seal diagram is an all-rubber oil seal, which is installed and held tightly on the rotating shaft and rotates with the rotation of the shaft. It is widely used in metallurgy, machine tools, mining, construction, environmental protection, electric power, and other industry machinery, and is used by the majority of mechanical design engineers, and a wide range of uses. It is mainly used to prevent the mixture of dust, water, or sludge from invading the transmission parts, and to help the sealing grease not leak, so that the bearing and the main seal can maintain a good working condition in a bad environment, thereby extending the working life.
Basic Dimension Parameters of V-Type Sealing Ring
Technical Characteristics of V-Type Axial Sealing Ring
1. Simple installation, strong adaptability. Because it is an all-rubber product, it can be installed after moderate stretching according to different shaft diameters.
2. V-type sealing diagram, with a good flexible lip, good resilience, and small adhesion to the friction surface, the lip can adjust itself with the coordination of the contact surface, so the requirements for the friction surface are not very strict.
3. Due to the flexibility of the lip and the small Shore hardness of the rubber, it is generally allowed to run under dry conditions without grease.
4. Installation and disassembly are as convenient, especially the large V-type sealing ring, which can be connected by segmented hot vulcanization at the equipment installation or disassembly site.
5. Large size span, from 4.5 mm to 2000 mm in diameter, can be completely covered with seamless material selection
Material Selection
The material requirements of the V-shaped axial sealing diagram need to consider the following physical properties:
1. Good wear resistance.
2. Excellent compressive deformation resilience.
3. Good scalability.
4. Good aging resistance and high-temperature resistance.
If you are looking for more details, kindly visit our website.
The V-shaped axial seal is a fully rubber oil seal that mounts directly onto the rotating shaft and stays self-retained without special surface requirements. It rotates with the shaft to provide reliable sealing, allows quick installation and disassembly, and supports large sizes - from 4.5 mm to 2000 mm - using seamless or segmented hot-vulcanized connections for on-site assembly.
The V-shaped axial seal diagram is an all-rubber oil seal, which is installed and held tightly on the rotating shaft and rotates with the rotation of the shaft. It is widely used in metallurgy, machine tools, mining, construction, environmental protection, electric power, and other industry machinery, and is used by the majority of mechanical design engineers, and a wide range of uses. It is mainly used to prevent the mixture of dust, water, or sludge from invading the transmission parts, and to help the sealing grease not leak, so that the bearing and the main seal can maintain a good working condition in a bad environment, thereby extending the working life.
Basic Dimension Parameters of V-Type Sealing Ring
Technical Characteristics of V-Type Axial Sealing Ring
1. Simple installation, strong adaptability. Because it is an all-rubber product, it can be installed after moderate stretching according to different shaft diameters.
2. V-type sealing diagram, with a good flexible lip, good resilience, and small adhesion to the friction surface, the lip can adjust itself with the coordination of the contact surface, so the requirements for the friction surface are not very strict.
3. Due to the flexibility of the lip and the small Shore hardness of the rubber, it is generally allowed to run under dry conditions without grease.
4. Installation and disassembly are as convenient, especially the large V-type sealing ring, which can be connected by segmented hot vulcanization at the equipment installation or disassembly site.
5. Large size span, from 4.5 mm to 2000 mm in diameter, can be completely covered with seamless material selection
Material Selection
The material requirements of the V-shaped axial sealing diagram need to consider the following physical properties:
1. Good wear resistance.
2. Excellent compressive deformation resilience.
3. Good scalability.
4. Good aging resistance and high-temperature resistance.
If you are looking for more details, kindly visit our website.
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture