Supplier: Hench Technology Co., Ltd.
Contact person: Mr. bai manager
Position: manager
Address: Hench Technology ,3rd Floor, Gate A, Building 4, Shengji Group, Haitai Fazhan Erlu, Xiqing District
Country: China
Phone: 15012575315 - Mobi: 15012575315
Solid battery die HMN-PG
Price:
Solid battery dieThe die material is made of PEEK and ceramic core, and the diameter can be customized as per requirements.
Product Description
Operating Procedure
Place the sample into the solid-state battery mold.
Assemble the battery specific Dies and place it into the carrier. Tighten the nut.
Place the mold in the center of the hydraulic press to ensure the hydraulic orifice is ventilated.
Tighten the front knob to the right.
Swing the lever to apply pressure up to 1 ton, hold the pressure for 1 minute, then remove the mold.
Connect the air nozzle to the positive and negative electrodes for detection.
hydraulic press suppliers
Product Description
| Instrument model | HMN-PG |
| Shelf material | 304 Stainless steel |
| Mold material | PEEK Insulating material |
| Indenter material | 3Cr13 Stainless steel |
| Sample size | Φ8, 10, 12, 12.7, 13, 20mm (d) |
| Die size | 50×90mm (M×L) |
| Size | 100×140mm (D×H) |
| weight | 2.5Kg |
Place the sample into the solid-state battery mold.
Assemble the battery specific Dies and place it into the carrier. Tighten the nut.
Place the mold in the center of the hydraulic press to ensure the hydraulic orifice is ventilated.
Tighten the front knob to the right.
Swing the lever to apply pressure up to 1 ton, hold the pressure for 1 minute, then remove the mold.
Connect the air nozzle to the positive and negative electrodes for detection.
hydraulic press suppliers
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture