Contact person: Mr. S-T Intelligence
Position:
Address: Building 6, Liangchuang Industrial Park, No.45 Dongfu Road, Suzhou City, Jiangsu
Country: China
Phone: - Mobi: +86 400 800 6817
STSH2 Servo Straight Side Double Points High Precision Pres
Price:
Main motor is Low Speed High Torque Servo Motor
Brand: S-T Intelligence
Servo Drive & Control System.
Slide pneumatic-hydraulic overload protection: slide stops automatically when the load is 10% more than the nominal capacity.
Overload reset time (after the slide stops at TDC) <180seconds.
Manual blown-off can be carried out when the mode switch is at "test" position.
Eight-points square guides for slide. Super-long guiding. Perpendicularity between the slide movement and bolster top has been kept.
Electrical die height adjustment device. Adjusted only at normal counterbalance pressure, hydraulic protection and lubrication.
Automatic stop at upper and lower adjustment limit.
Manual adjustment by functional keys / hand wheel. Automatic adjustment by preset value.
Counterbalance Pressure to be adjusted manually / automatically, interlocking with adjustment motor of slide and the control of servo motor.
The frame is of welded structure with stress-relief.
The welding groove form and weld selection meet the standards, and CO2 gas shielded welding is used. Special inspections such as non-destructive testing are carried out on key welds.
After welding, the Straight Side Double Points High Precision Press machine body undergoes treatment to eliminate internal stress. Eliminating the deformation of components and instability in the overall geometric accuracy of the press structure caused by stress release after long-term operation of the press.
To ensure the accuracy and reliability of the dimensions of large parts such as the machine body, all welding of large parts is completed on the boring and milling machining center, with one clamping to ensure the geometric accuracy of the press.
Brand: S-T Intelligence
Servo Drive & Control System.
Slide pneumatic-hydraulic overload protection: slide stops automatically when the load is 10% more than the nominal capacity.
Overload reset time (after the slide stops at TDC) <180seconds.
Manual blown-off can be carried out when the mode switch is at "test" position.
Eight-points square guides for slide. Super-long guiding. Perpendicularity between the slide movement and bolster top has been kept.
Electrical die height adjustment device. Adjusted only at normal counterbalance pressure, hydraulic protection and lubrication.
Automatic stop at upper and lower adjustment limit.
Manual adjustment by functional keys / hand wheel. Automatic adjustment by preset value.
Counterbalance Pressure to be adjusted manually / automatically, interlocking with adjustment motor of slide and the control of servo motor.
The frame is of welded structure with stress-relief.
The welding groove form and weld selection meet the standards, and CO2 gas shielded welding is used. Special inspections such as non-destructive testing are carried out on key welds.
After welding, the Straight Side Double Points High Precision Press machine body undergoes treatment to eliminate internal stress. Eliminating the deformation of components and instability in the overall geometric accuracy of the press structure caused by stress release after long-term operation of the press.
To ensure the accuracy and reliability of the dimensions of large parts such as the machine body, all welding of large parts is completed on the boring and milling machining center, with one clamping to ensure the geometric accuracy of the press.
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture