Supplier: Shenzhen Sinopoly New Energy Co., Ltd
Contact person: Mr. Sinopoly
Position:
Address: F22, Block A, Park Road, Dengliang Road, Nanshan District, Shenzhen
Country: China
Phone: - Mobi: 86-0755-86528305
Plastic prismatic lithium battery cell 40ah
Price:
Plastic prismatic lithium battery cell 40ah for power use
Plastic prismatic lithium battery cell Features
1.Our Customized Electrolyte, featuring a high LiPF6 concentration and tailored additives, proves its effectiveness in extreme cold during tests in Northeast China, significantly boosting low-temperature performance.
2.Sinopoly employs stringent Aqueous Processing for positive electrode materials, prioritizing top-tier sources with smaller particle sizes and minimal fluctuations in size range for enhanced low-temperature performance.
3.Our selected negative electrode materials match the particle size distribution of positive electrodes, enhancing low-temperature efficiency.
4.Utilizing a 40 micron-meter separator enhances both safety and low-temperature performance of the battery.
High Charge and Discharge Rates
1.Sinopoly battery utilizes a proprietary aqueous LiFePO4 processing method for the positive electrode, featuring independent intellectual property rights. This enhances the battery's charge and discharge rates.
2.The distinctive areal density and compaction design of both positive and negative electrodes guarantee rapid li-ion movement at high speeds, a critical factor for optimizing battery performance rates.
3.The battery's separator thickness and porosity are finalized after thorough demonstrations, ensuring high-rate charge and discharge capabilities while prioritizing safety standards.
Size(L: W: H) | L:116±1mm*W:46±1mm*H:186±1mm |
Nominal capacity | 40Ah |
Nominal voltage | 3.2V |
Weight | 1.5Kg±0.1g |
Maximum charging voltage | 3.65V (0℃≤T≤55℃) |
Minimum discharge voltage | 2.5V (0℃＜T≤60℃) |
Energy density | ≥85Wh/kg (Mass energy density) |
Rated power | 128W |
AC internal resistance | ≤0.3mΩ (Fresh cell) |
Cycle Life | ≥5000 (0.33C/0.33C,80%DOD@25℃) |
Standard discharge current | 1C |
Maximum continuous discharge current | 3C |
Max.charge current | 2C |
Plastic prismatic lithium battery cell Features
1.Our Customized Electrolyte, featuring a high LiPF6 concentration and tailored additives, proves its effectiveness in extreme cold during tests in Northeast China, significantly boosting low-temperature performance.
2.Sinopoly employs stringent Aqueous Processing for positive electrode materials, prioritizing top-tier sources with smaller particle sizes and minimal fluctuations in size range for enhanced low-temperature performance.
3.Our selected negative electrode materials match the particle size distribution of positive electrodes, enhancing low-temperature efficiency.
4.Utilizing a 40 micron-meter separator enhances both safety and low-temperature performance of the battery.
High Charge and Discharge Rates
1.Sinopoly battery utilizes a proprietary aqueous LiFePO4 processing method for the positive electrode, featuring independent intellectual property rights. This enhances the battery's charge and discharge rates.
2.The distinctive areal density and compaction design of both positive and negative electrodes guarantee rapid li-ion movement at high speeds, a critical factor for optimizing battery performance rates.
3.The battery's separator thickness and porosity are finalized after thorough demonstrations, ensuring high-rate charge and discharge capabilities while prioritizing safety standards.
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture