Supplier: Guangdong Yufeng Industries Co.,Ltd
Contact person: Mr. YF POWER
Position:
Address: No.10 Longxi Road, Nan cheng Street, Dongguan, Guangdong, China
Country: China
Phone: - Mobi: 19576840556
FPQ2W-10/3T20 10kV Pin Insulators
Price:
The crimping process of polymer pin type insulators should pay attention to the crimping force, compression amount, pressing speed, holding time, etc. during crimping. Due to the cumulative error of the size of mandrel and fittings, the maximum error can reach 0.2mm. According to experience, a compression error of 0.05 mm may cause an error of more than 10% on the crimping strength. Therefore, the crimping process will focus on pressure, and determine the proper The crimping force; in order to reduce the influence of the mandrel and the material fluctuation of the fittings, it is assisted to control the amount of compression; the pressing speed should not be fast, and the fittings should be fully plastically deformed during the slow pressing process, and the holding time should not be too long , to prevent the mandrel from breaking, the best experience time is about 2s.
Specifications of FPQ2W-10/3T20 10kV polymer pin insulator
For more information about power line hardware, please feel free to contact us!
Specifications of FPQ2W-10/3T20 10kV polymer pin insulator
| Type | FPQ2W-10/3T20 |
| Rated bent withstand load (kN) | 3 |
| Height (mm) | 260 |
| Max. diameter of insulated parts (mm) | 146 |
| Min. Creepage distance (mm) | 184 |
| Min. Nominal creepage distance (mm) | 460 |
| Downward bolt thread diameter (mm) | 20 |
| Rated voltage (kV) | 10 |
| The highest voltage of equipment (kV) | 12 |
| 1min power frequency wet withstand voltage not less than (kV) | 50 |
| Full wave lightning impulse withstand voltage(peak value) not less than (kV) | 110 |
For more information about power line hardware, please feel free to contact us!
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture