MS Corrugated Cardboard Production Line

Price:

Working Principle:
Tile line is the abbreviation of corrugated cardboard production line.It is a streamline line consisting of pressing, corrugating, gluing, bonding, grading, paper making, and code output. Such as single corrugated paper production line is made of web frame, single- sided corrugated cardboard machine, composed of rotary paper cutting unit, using web material and potato or corn starch adhesive, single-sided corrugated board continuous production and cut into the required specifications, production of cardboard no longer dry or dry, and glue machine or laminating machine with the use of, can produce more than three layers of corrugated cardboard.

Equipment configuration and technical description

name	quantity	remarks
Hydraulic reel stand	5 set	1.Multi-point brake, hydraulic drive lift, left and right translation, medium. 2.The guide rail length 6000 mm, the trolley adopts 10 mm medium plate welding.
Paper bike	10set
Single Paper preheating machine	4set	Roller ￠800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of paper within 360 range
Adsorption Single facer machine	2set	Corrugated main roller ￠320 mm,material using tungsten carbide. Imported main bearing,PLC automatic glue control,man-machine interface touch screen,paper break automatic stop pressure relief,steam heating mode
Triples preheating machine	1set	Roller ￠800 mm,including pressure vessel certificate. Electric adjustment package angle. The wrapping angle can adjust the heating area of the paper in the range of 360.
Double gluing Machine	1set	Cots 268 mm. diameter Each layer of independent frequency conversion motor drive, PLC adjust the glue clearance and man-machine interface.
Transport Bridge	2set	Main beam 200 mm channel steel, independent frequency conversion motor drive paper transfer, adsorption tensioning. Electric correction
Double sided machine	1set	The frame 400 mm national standard channel steel,chromium plating hot plate 600 mm *14 block,the entrance ￠mm hot cylinder causes the surface paper to raise the temperature extremely fast 6 groups to touch the whole process pressure plate design structure. PLC automatic control pressure plate. Temperature display,frequency conversion motor.400

Type electric slitter scorer machine	1set	10 scourer and 6 slitter Tungsten alloy blade, six-knife ten-wire type, electric row knife, electric lift left and right movemen
Computer NC-cut off machine	1set	Full AC Servo Control, Energy Storage Brake, Spiral Knife Structure, Oil-immersed Gear Drive
Sheet transfer conveyor system	1set	Imported high strength belt output, paper side standard conveyor
Rubber station system	1set	Pipeline customer self-provided. The device consists of carrier tank, main tank, storage tank, rubber pump and rubber pump.
Air supply system	1set	Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping
Electrical control cabinet system	1set	Electronic control system: adsorption single-sided machine, driving part, electric thin knife machine, double-sided machine, glue coating machine all adopt frequency conversion motor, Delta frequency conversion control system. The operation interface is simple and convenient, the speed display control cabinet is equipped with each unit speed display, the unit calls, the emergency stop function. The main relay adopts French Schneider famous brand products.
vapour system	1 set	Steam components including piping valves, trap valves, meters, etc. in equipment, customer-owned heat source and piping

Main technical parameters and requirements of production line

Maximum production	1400mm		Design Production Speed	180m/min
Three-tier working	100-150m/min		Five-tier working	80-120m/min
Precision of Longitudinal Cutting Paper	mm ±1		Cross cutting accuracy	mm ±1
The above speed index shall be up to: production width of 1400 mm, meet the following paper standards and ensure that the surface temperature of the heated parts of the equipment is 175℃. Table 2
Surface paper indicators	g/㎡100-180 g/㎡ ring pressure index (N.m/g)≥8(moisture content 8-10%) g/㎡100-180≥(N.m/g)
Core paper indicators	g/㎡80-160 g/㎡ ring pressure index (N.m/g)≥5.5(moisture content 8-10%) g/㎡80-160 g/㎡(N.m/g),5.5(moisture content 8-10%)
Paper finger	g/㎡90-160 g/㎡ Ring pressure index (N.m/g)≥6(moisture content 8-10%) g/㎡90-160 g/㎡(N.m/g)6(moisture content 8-10%)
Flute type combination
Steam requirements	maximum pressure16kg/cm2	wirking pressure 10-12kg/cm2	dosage4000kg/Hr
Electricity	AC380V 50Hz 3PH	Installed capacity ≈250 KW	The common power ≈150 KW
compressed air	9 kg/cm2 maximum pressure	Common pressure kg/cm2 4-8	Amount m3/min 1
space usage	≈Lmin85mWmin10mHmin5m

Hydraulic reel stand
Structural characteristics：
★ use full hydraulic drive to complete the base paper clamping,loosening,moving to the middle,left and right translation and other actions,the base paper lift using hydraulic drive.
★ brake adjustment adopts multi-point brake system.
★ each paper rack with two paper cars from both sides can be paper at the same time.
Technical parameters：
range： maximum 1400 mm minimum 1000 mm 2、 diameter： maximum 1300 mm minimum 350 mm 1
paper frame spindle diameter ：￠240 mm 4、 gas source working pressure (MPA):0.4-0.8 MPA
Equipment Size： Lmx4.3*Wmx1.8*Hmx1.4 5 6. unit weight： maximum Kg 4000

Hydraulic system parameters：
Working pressure (MPA):16-18 MPA 2, lift hydraulic cylinder :￠100×440 mm
Tightening hydraulic cylinder ：￠63×1300 mm 4、 Hydraulic station motor power ：3 KW --380V --50Hz
5, Solenoid valve voltage： V 50Hz 220

Main purchased parts, raw materials and origin:

Main Name	producing area	Material Type
main axle	Tin Steel Production	242mm diameter
swing arm	Production	HT200Resin sand cast iron
wallboard	Jigang	Q235A Welded Parts
bearing	Ha, Wa, Lo
Tooth paper clip	Xu Sheng, Zhejiang	3.4 inches
Main electrical appliances	France Schneider
push-button	Zhengtai NP2 Series
air switch	France Schneider
pneumatic component	Sonno, Zhejiang
hydraulic pressure station	Shandong Zaozhuang
Brake pump	Zhejiang

Structural characteristics：
★ track is completely buried,the main frame is 140 channel steel welded with ￠20 mm cold drawn round steel,the track length is 6000 mm.
★ each paper rack with two paper cars from both sides can be paper at the same time. Push the reel in place.
Main Outsourced Parts, Raw Materials and Origin:

Main Name	Brand or origin	Material Type
Track and Paper Truck	Tanggang or Jigang	14 channel, Q235A、 steel
bearing	Ha, Wa, Lo

We are pleased to deliver Corrugated Cardboard Production Line, Corrugated Cardboard Machine. Safe payment and on time deliver time will give you.Our company specializes in the production of corrugated cardboard production lines, carton production lines, we provide customized services, come to consult us!

SEND INQUIRY

Please fill in fully your information to send email

Your name*

Email*

Company

Address*

Country*