Supplier: HEBEI FINE ART CO., LTD.
Contact person: Mr. ZHONG
Position:
Address: Room 703, Zhongyuan Building , 368 North Youyi Street, Shijiazhuang, Hebei, China .
Country: Vietnam
Phone: 031187786775 - Mobi: 1393307115
Plastic Product Design Vannova
Price:
Plastic Product Design Vannova
Prior to injection molding, the movable mold and the fixed mold are closed under the driving of the injection molding machine to form the cavity and the gating system; and the plasticized plastic melt is injected into the cavity by the gating system for cooling solidification, upon cooling solidification, the movable mold and the fixed mold are opened, and plastic parts are ejected by the demolding mechanism.
I. Classification of injection molds
Composition of injection molds
Two major parts:
Movable mold (installed on the movable mold plate of the injection molding machine)
Fixed mold (installed on the fixed mold plate of the injection molding machine)
Prior to injection molding, the movable mold and the fixed mold are closed under the driving of the injection molding machine to form the cavity and the gating system; and the plasticized plastic melt is injected into the cavity by the gating system for cooling solidification, upon cooling solidification, the movable mold and the fixed mold are opened, and plastic parts are ejected by the demolding mechanism.
Injection molding principle
Fig. 3-1 shows the principle of the injection molding of the plunger type injection molding machine
Fig. 3-1 One of injection molding principles 1-Plunger 2-Hopper 3-Spreader 4-Heater 5-Nozzle 6-Fixed mold plate 7-Injection molding part 8-Movable mold plate
designing mouldings company: HEBEI FINE ART CO., LTD.
Prior to injection molding, the movable mold and the fixed mold are closed under the driving of the injection molding machine to form the cavity and the gating system; and the plasticized plastic melt is injected into the cavity by the gating system for cooling solidification, upon cooling solidification, the movable mold and the fixed mold are opened, and plastic parts are ejected by the demolding mechanism.
I. Classification of injection molds
Composition of injection molds
Two major parts:
Movable mold (installed on the movable mold plate of the injection molding machine)
Fixed mold (installed on the fixed mold plate of the injection molding machine)
Prior to injection molding, the movable mold and the fixed mold are closed under the driving of the injection molding machine to form the cavity and the gating system; and the plasticized plastic melt is injected into the cavity by the gating system for cooling solidification, upon cooling solidification, the movable mold and the fixed mold are opened, and plastic parts are ejected by the demolding mechanism.
Injection molding principle
Fig. 3-1 shows the principle of the injection molding of the plunger type injection molding machine
Fig. 3-1 One of injection molding principles 1-Plunger 2-Hopper 3-Spreader 4-Heater 5-Nozzle 6-Fixed mold plate 7-Injection molding part 8-Movable mold plate
designing mouldings company: HEBEI FINE ART CO., LTD.
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture