Supplier: FARMOST TRADING CO., LTD.
Contact person: Ms. Susan
Position:
Address: Room 1302, Building 06, No.399 Zhongyang Road, TenGen International Plaza, Nanjing CityChina
Country: China
Phone: 86-25-83417690 - Mobi:
Rubber Accelerator TMTD
Price:
Item Name: Accelerator TMTD
Chemical Name: Tetramethyl thiuram disulfide
Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster.
Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide
Packing: In 25kgs bag.
Storage: Keep container tightly closed in a cool, well-ventilated place.
Chemical Name: Tetramethyl thiuram disulfide
| Item | Powder | Oil powder | Granular |
| Appearance | White or light gray powder | White or light gray oily powder | White or light gray granular |
| Initial M.P. (Min) ≥ °C | 142.0 | 142.0 | 142.0 |
| Loss on drying (Max) ≤ % | 0.30 | 0.40 | 0.40 |
| Ash (Max) ≤ % | 0.30 | 0.40 | 0.40 |
| Residue on 150 μm sieve (Max) ≤ % | 0.10 | 0.10 | - |
| Granular diameter mm | - | - | 1.0-3.0 |
| Broken strength N | - | - | 2-5 |
| Oil content,% | - | 1.0-2.0 | - |
Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster.
Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide
Packing: In 25kgs bag.
Storage: Keep container tightly closed in a cool, well-ventilated place.
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture