Contact person: Ms. Juna Zhou
Position: sales
Address: Room B501-B502,No. 08,Kesheng Road,SCI-TECH Park,No. 1633,Beitai Road,Baiyu District,Guangzhou City
Country: China
Phone: 86-020-28026093 - Mobi: 86 13600451609
Fish cold-air drying chamber
Price: Negotiable
Strong point:
1. Closed drying system,without weather influences;Be suitable for different region and area, no matter summer or winter.
2.Regenerative cycle patented technology can satisfy the drying technology requirement about HIGH TEMPERATURE AND LOW HUMIDITY.
3.Modules control design can meet the demand for dehumidification volume in different drying cycle,accurately controlled and energy saving.
4.Annual dehumidification performance ratio: SEMR arrived at 1:2, and saved energy for more than 40% compared to fuel coal.
Dehumidifying regenerative cycle is to increase regenerator inside the heat pump dehumidification dryer, to decline in temperature of evaporator so that the air temperature to rise when entering into the condenser; Regenerative cycle make the cooling capacity of evaporator use to decrease air cooling (invalid consumption cold reduction process), so it used to increase cooling capatity when cooling dehumidification process. So that the best evaporation temperature and best dehumidification increased for heat pump drying; Increased regenerative cycle of the heat pump dehumidification drying is more than 30% energy saved when compare to the ordinary heat pump drying.
Feature:
1. An intelligent equipment integrating dehumidification, heating, cooling, moisture discharge and ventilation, a new energy-saving and emission-reduction drying equipment.
2, Within closed cycle drying methods of heat pump dehumidification, saved working cost, and it saved energy more than 50% compared to the traditional open-drying mode; No waste gas to release, no noise pollution, and environmental protection.
3, free from the external environment temperature and humidity affect the requirements for each region.
4, With wide temperature range, it can be adopted cold air and hot air drying, controlled deeply.
5, Using our patented regenerative cycle heat pump dehumidification mode, broaden the application of dehumidifier for industrial drying area. It saved more cost and more than 30% energy was saved when comparing to ordinary heat pump dehumidification drying.
6, Adoptted the low-temperature drying mode (18 to 85 ° C), it closed to the natural dry, good quality, good color, high level about the drying goods, non-polluting, and it more meet the standard requirement of environmental protection and health.
7, Without deformation, no cracking, no discoloration, no deterioration, no oxidation, dry thoroughly, dried rehydration, less loss of nutrients when drying period, long stockage time, more effectively to protect color, smell, taste, individual forms and active ingredients than any conventional drying equipment.
8, Closed loop drying method applied for an inert dry environment (nitrogen, carbon dioxide, argon, helium), suitable for volatile component material like inflammable and explosive materials, hazardous and toxic materials, pungent odor materials, easy oxide material, to be recovered in the aroma.
9, PLC + touch screen automatic control mode, stable function, easy to operate; It can be setted for different drying curve and meet the needs of different types when programmable control mode adoptted.
10, the engine room independent placed outside the room, easy to maintain and operate, extend equipment life.
1. Closed drying system,without weather influences;Be suitable for different region and area, no matter summer or winter.
2.Regenerative cycle patented technology can satisfy the drying technology requirement about HIGH TEMPERATURE AND LOW HUMIDITY.
3.Modules control design can meet the demand for dehumidification volume in different drying cycle,accurately controlled and energy saving.
4.Annual dehumidification performance ratio: SEMR arrived at 1:2, and saved energy for more than 40% compared to fuel coal.
Dehumidifying regenerative cycle is to increase regenerator inside the heat pump dehumidification dryer, to decline in temperature of evaporator so that the air temperature to rise when entering into the condenser; Regenerative cycle make the cooling capacity of evaporator use to decrease air cooling (invalid consumption cold reduction process), so it used to increase cooling capatity when cooling dehumidification process. So that the best evaporation temperature and best dehumidification increased for heat pump drying; Increased regenerative cycle of the heat pump dehumidification drying is more than 30% energy saved when compare to the ordinary heat pump drying.
Feature:
1. An intelligent equipment integrating dehumidification, heating, cooling, moisture discharge and ventilation, a new energy-saving and emission-reduction drying equipment.
2, Within closed cycle drying methods of heat pump dehumidification, saved working cost, and it saved energy more than 50% compared to the traditional open-drying mode; No waste gas to release, no noise pollution, and environmental protection.
3, free from the external environment temperature and humidity affect the requirements for each region.
4, With wide temperature range, it can be adopted cold air and hot air drying, controlled deeply.
5, Using our patented regenerative cycle heat pump dehumidification mode, broaden the application of dehumidifier for industrial drying area. It saved more cost and more than 30% energy was saved when comparing to ordinary heat pump dehumidification drying.
6, Adoptted the low-temperature drying mode (18 to 85 ° C), it closed to the natural dry, good quality, good color, high level about the drying goods, non-polluting, and it more meet the standard requirement of environmental protection and health.
7, Without deformation, no cracking, no discoloration, no deterioration, no oxidation, dry thoroughly, dried rehydration, less loss of nutrients when drying period, long stockage time, more effectively to protect color, smell, taste, individual forms and active ingredients than any conventional drying equipment.
8, Closed loop drying method applied for an inert dry environment (nitrogen, carbon dioxide, argon, helium), suitable for volatile component material like inflammable and explosive materials, hazardous and toxic materials, pungent odor materials, easy oxide material, to be recovered in the aroma.
9, PLC + touch screen automatic control mode, stable function, easy to operate; It can be setted for different drying curve and meet the needs of different types when programmable control mode adoptted.
10, the engine room independent placed outside the room, easy to maintain and operate, extend equipment life.
SEND INQUIRY
Please fill in fully your information to send email
CATEGORY
Agriculture