Fusion Splicer Pt-660

Features
Color LCD monitor and 256x magnification
Compact and lightweight
Reversible monitor with control panel on each side
Maximum wind velocity: 15m/s
8sec splice time, 40sec tube-heat time
Simultaneous X and Y views
Large capacity internal battery
System test: ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8,000 groups of splice results
Multiple language options
Specification
Model     Pt-660
Applicable fibers     SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length     12~16mm（Coating diameter：250μm）    
16mm（Coating diameter: 250 ~ 1000μm）
Fiber diameter     Cladding diameter：80 ~150μm
Coating diameter：100~ 1000μm
Fiber Count     Single
Fiber aligning method     Core or clad aligning
Image processing method     Digital
Actual average splice loss     0.02dB （SM）, 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing time     Typical 8 sec，with standard SM fiber
Splicing mode      53(templet), 40(user)
Splice loss estimate     More accurate
Return loss     ＞60dB
Storage of splice result     4000 results，20 parameter per result
Fiber display and magnification     300X（X or Y view）,150X（X and Y view）
Tube heating time     Typical 30 sec
Tube heating mode     8(templet), 24(user)
Tube heating temperature     Can be adjusted
Applicable Protection sleeve length     60mm, 40mm and a series of micro sleeves
Tension test     2N
Electrode life     2500
No.of splice/heating with battery     Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen     5 inch color LCD monitor
Image change over     The fiber image is turned upside down
Terminals     USB 1.1 and VGA
Operating condition     0 ~ 5000m above sea level, 0 ~ 95%RH and -10～50℃, respectively, Max. wind velocity of 15m/s
Power supply     AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions     170mm(L) x170mm (W) x140mm (H)
Weight     2.7 Kg excluding battery,3.3 Kg including battery