Fusion Splicer KL-280

Features
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto check quality of  cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
Specefications
Model     KL-280
Applicable fibers     SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length     8~16mm（Coating diameter：250µm）
16mm（Coating diameter: 250 ~ 1000µm）
Fiber diameter     Cladding diameter：80 ~150µm
Coating diameter：100~ 1000μm
Fiber Count     Single
Fiber aligning method     Core  aligning
Return loss     ＞60dB
Actual average splice loss     0.02dB （SM）,0.01dB (MM),
0.04dB (DS),0.04dB( NZDS)
Splicing mode     auto
Splicing mode     12(templet), 188(user)
Typical Splicing time     Typical 9 sec，with standard SM fiber
Protection sleeve length     60mm, 40mm and a series of micro sleeves
Storage of splice result     5000 results，3 parameter per result
Tension test     2N
Fiber display and magnification     400X（X or Y view）,200X（X and Y view）
Tube heating time     Typical 30 sec
Electrode life     2500
No.of splice/heating with battery     Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen     5 inch color LCD monitor
Image change over     The fiber image is turned upside down
Terminals     RS 232
Operating condition     0 ~ 5000m above sea level,0 ~ 95%RH and -10～50℃,respectively,Max. wind velocity of 15m/s
Power supply     AC 100-240V with AC adapter;inner Li-battery(6600mAH)
Dimensions     150mm(L) x150mm (W) x160mm (H)
Weight     3.52 Kg including battery